Technical / Build planning

Better questions.
Better starting points.

Planning checklists to help you define a custom intake or exhaust project before ordering components.

Before you order

These notes are a planning aid, not an installation specification. Always use the current product dimensions and confirm compatibility with your engine and fabricator.

01 — Choosing a runner configuration

Record the exact engine and cylinder-head identification, port spacing and the available installation envelope. Consider throttle-body position, nearby components and access to fasteners. Runner dimensions must be selected for the complete engine combination; do not infer compatibility from appearance alone.

02 — Planning a dual-plenum build

List every interface from the cylinder head to the throttle body. Check which pieces are included in the chosen kit and which must be fabricated separately. Make a packaging mock-up before final cutting and agree the assembly sequence with the fabricator.

03 — Preparing for fabrication

Confirm the material specification and fit-up requirements for each component. Follow the welding equipment and consumable manufacturers’ instructions and use an appropriately qualified fabricator. Final inspection and testing should be planned as part of the job, not left until installation.

04 — Selecting an exhaust silencer

Measure the available body length and diameter, pipe connections and mounting positions. Check the noise limits applicable to your intended venue or use. A silencer selection alone does not establish compliance for a complete exhaust system.

Send the details, not just the engine name.

Useful enquiry information includes the engine code, intended use, selected components, photographs and a dimensioned sketch. Include units on every measurement.

Ask about your application ↗